Category : Mold Removal

What are the Methods to Prevent the Growth of Mold in Long Island?

The climate on Long Island is hot and humid. While these weather conditions are ideal for spending time outside, they may also encourage mold growth inside your home. And this is where mold remediation in Long Island comes in handy. Contact the professionals and get the job done!

Long Island homes have a higher chance of mold problems than properties in places with drier climates. This isn’t only about your home’s looks being ruined. Mold growth that goes unchecked can lead to a variety of ailments. Mold can also cause physical harm to the surfaces of your home.

This post will look at practical techniques to combat and avoid mold intrusion in your home.

#1 Install HEPA Filters

Do any of the following components have HEPA filters installed?

• Register for return air
• Supply duct registers for cooling and heating
• The inhalation of fresh air

The term “high-efficiency particulate air filter” (HEPA filter) is an abbreviation for “high-efficiency particulate air filter.” These filters catch dust mites, pollen, and pet dander, among other things.

These mechanical filters do an excellent job of eliminating allergens and irritants from your home’s air. Once entering the HEPA filter, the mold spores die. Mold spores cannot thrive in the dry and sterile environment inside the filter because they lack moisture and nutrients.

#2: Inspect the Affected Areas

Mold growth is more likely in several locations of your house. To guarantee that no potentially obvious mold growth goes undiscovered, you should inspect these areas of your home frequently.

Here are some of the most important locations to visit:

• Ceilings and walls
• Your rugs on both sides
• Basements, crawl spaces, garages, and attics
• Furniture made of wood
• The siding on the outside
• The roof and its surroundings
• Your bathroom, kitchen, and laundry room’s plumbing systems

You should be aware of more than just real mold colonies. You should be concerned when you notice any water damage, leaks, or even slight stains.

The signs of water damage and leaks are easy to spot. Many homeowners, however, are curious about the appearance of mold growth. Although the appearance of each mold strain varies, the following warning signals cover the most common characteristics and symptoms of all strains:

• Moldy patches of various colors, such as green, white, yellow, blue, and black
• The mold patches that are suspected are generally uneven in shape.
• A musty odor is reminiscent of wet basements or crawl spaces.
• Wood or other building materials discoloration
• The mold in question appears slimy or fuzzy.
• Surfaces such as textiles and wood begin to rot or disintegrate when exposed to mold.

#3: Use A Hygrometer

Digital hygrometers can help you detect the presence of mold in your house. Keeping a check on your home’s moisture levels is a good idea now that it’s been shown that high indoor humidity is linked to mold growth.

There are multiple hygrometers on the market. These devices are referred to as humidity gauges or humidity meters.

Your property’s yearly median indoor humidity level should be less than 60%. Mold spores prefer an interior atmosphere with a more than 70% humidity level.

For mold removal in Long Island, you can now directly contact New York  Mold Specialist. Get in touch with us now!

5 Reasons Why You Shouldn’t Handle Mold on Your Own

Mold is the last thing anyone wants to discover in their house. But, unfortunately, some of you come across the silent intruder growing behind your cupboards and walls. If you are one of them and wondering how to get rid of it, the simple answer is you don’t do it yourself and hire professionals to come in and clear up the mold for you.

We are not against most DIYs, but not all DIYs can solve your problem. Here are the top 5 reasons why you should not handle mold yourself:

1. You Have Absolutely No Idea What You’re Up Against.

You may think that a mold is a mold. But mold comes in various forms, some of which are more dangerous than others, for example, black mold. You may not figure out what you are dealing with but, a seasoned mold remediation service will conduct a series of tests and collect mold samples to figure out.

2. You Can Feed the Mold.

You may unintentionally aggravate the situation by trying to clean up mold on your own. As water is one of the main ingredients in almost every household cleaner on the market, it is also one of mold’s primary food sources. Therefore, using these products only feeds the mold and worsens the situation.

3. You Can Get Health Issues.

Cleaning up mold in your house is a big deal! While cleaning mold, you can run the danger of releasing mold spores into the air. As a result, you inhale even more of that dangerous chemical, as well as spread it to other parts of your home. But professionals make sure to enclose the workspace and use special equipment to remove mold spores from the air, preventing the spread of the disease. Some issues you can suffer from are:

• Headaches
• Sinus problems
• Fatigue
• Fungal infection
• Aggravated asthma

4. You Can Cause More Damage.

When you try to clean up mold with the wrong chemicals or treatments, the mold can react to certain substances or solutions, causing more spores to spread throughout your home. Professionals will examine the molds in your home and determine the best solution to cure them without causing damage to your home.

5. You May Miss a Spot.

Mold removal will require more than elbow grease. Unfortunately, all standard DIY chemicals, such as borax, vinegar, and even bleach, are not correct for deep cleaning. As a result, you may miss out on some spots, but certified professionals will detect mold in even the most unexpected places in your home and clean the affected areas thoroughly.

To Summarize

Now that you understand why you should not waste your time and money attempting to clean up mold yourself, you may be looking for a professional mold removal service to do the job correctly. If you require mold removal in Nassau County, contact New York Mold Specialist to have any mold in your home removed effectively.

Reasons to Go from DIY to Expert Assistance in Mold Removal

Go for DIY or not? Each homeowner is confronted with this inquiry, particularly with regard to something as regular as a mold.

If mold development covers 10 square feet or more, it isn’t easy to eliminate that much-influenced material and not have it contrarily sway your air quality.

The most important suggestion we can give when finding mold is an attempt to dodge cross-contamination. If remediated rapidly and effectively with the assistance of a mold removal Queens expert, you could save a lot of money.

Eventually, if we need to dispose of the mold, we need to comprehend the mold. For that, we require to consider a couple of things:

• Square feet of influenced material
• What sort of mold we’re managing?
• Cross-contamination.

Kinds of Mold

Generally, two kinds of mold can show up in our homes:

1. Everyday mold we can manage
2. Problematic mold that needs the support of an expert.

Ordinary Mold

The experts at mold removal New York companies state that moisture is the closest friend of mold. That is the reason we regularly discover it in ineffectively ventilated bathrooms, around our sinks, in our basements, and close to water heaters.

Fundamentally, if we find the source on time, we can undoubtedly dispose of it with some soap and water. But, sometimes, it might accept a touch of bleach also.

Whenever we’ve disposed of the guilty party, the following stage is keeping it from returning. The best thing we can do is make a point to leave as low moisture in the already mold-infested area. We can do as such by:

• opening the bathroom window after each shower
• installing a ceiling fan in our basement
• making sure to wipe down the sink and surrounding areas in the wake of utilizing them
• preventing moisture with legitimate ventilation

Tragically, during the rainy season, mold can develop at a fast rate, and before we know it, our whole home is loaded up with it. If that is the situation, at that point, we have some dangerous mold on our hands!

Risky Mold

The most significant mold issue is that it can go from “simple to-oversee ordinary mold” to “difficult to-oversee risky mold” inside days. Eventually, that implies that even a straightforward instance of shower mold can transform into a huge issue if it’s not managed on time and in the correct manner.

For instance, if mold spores begin extending to our drywall and sub-flooring, no measure of DIY can help us. Fortunately, there is an answer.

Hiring a Professional Mold Removal Expert

Eventually, when mold spins out of control in our home, water, soap, and even bleach won’t help us. Finding the reason for development is the most ideal approach to determine the issue and keep it from returning in the future.

New York Mold Specialist is an expert mold removal service that is prepared to handle any and every mold-related issue. At the point when you enlist us, the primary thing we will do is altogether inspect your home and contain the infested area.

After we’ve contained the mold, the subsequent stage is disposing of any harmed items in your home before sanitizing the area and playing out the last review.

In any case, it doesn’t end there. We’re additionally here to give expert counsel mold-testing to ensure your mold issue is away for acceptable!

How to Prevent Moldy Appliances?

Almost all of us love brand new, shiny, and bright new appliances. When your appliances are new, it can be an easy task for you to remove the clothes from the washing machine or store food in the refrigerator in the beginning. However, with time these appliances go through their own share of wear and tear. Besides, you also start finding molds growing inside your appliances like inside a washing machine or on the edge of the dishwasher.

The entire purpose of cleaning is defeated when you find mold in or around your appliances. Besides being unsightly, the appliances that carry mold can be unhealthy for your body. This is the reason why it is essential to start preventing mold from growing on your appliances instantly upon delivery. Some special appliances are infamous for growing molds that can trap the moisture and invite mold.

Some of the different ways to keep the appliances mold-free are:

Washing Machine

Often, the laundry room clicks first when people think of appliances. The laundry room is known to be a breeding ground for mold. It is because mold tends to grow from moisture and food like source, including dirt or cellulose. It is a clear fact to know that a pile of dirty laundry kept in a damp room for a longer duration can indeed be an excellent home for mold.

Irrespective of the fact that you have a front-loading washing machine or top-loading machine, molds tend to have some unique spaces where they can hide easily. You might see the mold growing in the creases of the door or the detergent drawer in case of front-loading washers. You are most likely to find mold in the drum or interior walls in the case of top-loading washing machines.

Tips offered by experts who conduct mold testing Brooklyn NY to prevent mold in the laundry room are:

• Do laundry often and try not to let the damp or dirty pile of clothes sit for a long time in the hamper or on the floor.
• It would be best if you always dried clothes right away.
• It would be best if you always kept the washing machine’s lid open after washes to let them dry out. Damp clothes and wet machines are invitation hunters for molds to grow.
• You can also refer to the user’s manual on how to clean out the washing machine regularly. Check the creases, drum, and detergent drawers at least once a month and ensure they are clean and free of grime.

Dishwasher

Another cozy home for mold is none other than the dishwasher. Like the washing machine, the dishwasher also has creases, compartments, and corners where moisture and food can hide. For example, the silverware baskets and interior panels can trap small pieces of food and go unnoticed. If you fail to clean the dishwasher regularly, it can be a top on your list of mold appliances.

Some of the tips to keep your dishwasher mold-free:

• You should ensure that you always rinse the dishes before loading them in the dishwasher. Mold can grow if small pieces of food sit for an extended period.
• After running the dishwasher, you should leave the door open for some time, so it is entirely dried before closing it.
• It would be best if you ran the dry heat function once a week to kill the bacteria that lie in the dishwasher’s interiors. After you are done running this function, you need to ensure that you leave the door open to allow the interior to dry.
• You can also remove the silverware baskets after each wash and clean them so you can be assured that no food is left behind in its creases.
• Refrigerator- The most cringe-worthy of all the moldy appliances is the mold inside of your refrigerator. It is because the food lives here. Food is one of the most commonplaces where the mold can grow. The fridge is a very comfortable place for mold to grow as it is always exposed to food and moisture. One of the most obvious ways to prevent mold is to keep the refrigerator clean, but you need to do way more than just wiping the trays and shelves.

Some tips given by experts who offer mold removal Brooklyn NY services are:

• You need to clean any spills or small pieces of food instantly.
• Remove all trays and drawers at least once a month. You can keep the refrigerator clean and mold-free by using vinegar.
• To clean the door creases, you need to use a toothbrush or small scrub brush.
• Before closing the door, you need to ensure the trays and shelves are cleaned.

If you think you have molds in your house, then you can call experts from New York Mold Specialist, and they will help you say a final goodbye to molds.

What Are the Ways to Prevent Moldy Appliances?

Everyone admires a brand new, polished, shiny, and clean appliance. Furnishing a brand new refrigerator or taking clothes out of a stainless dryer can become amazingly pleasant chores when your appliances are brand new. But everyone understands that in scheduled time, these same chores aren’t as enjoyable when you notice mold developing inside a washing machine or along the border of a dishwasher. It appears to destroy the whole purpose of cleaning when your cleaning appliances are moldy. Not only are moldy appliances hideous, but it can also be dangerous for your health when mold spores start to grow. That’s why it’s essential to begin mold removal Long Island on your appliances promptly upon delivery. Some specific appliances are infamous for catching moisture and drawing mold.

Here are some different methods you can keep these appliances clean and mold-free.

Washing Machine

When people consider moldy appliances, they normally think of the laundry room first. The laundry room can be a breeding spot for mold. It’s principally because mold originates from both moisture or a food-like source, such as dirt or cellulose. It’s obvious that a heap of dirty laundry left in a humid room for a few days can surely provide a habitat for mold. Regardless if you have a front-loading washer or a top-loading washer, mold has some unique places where it can escape. For front-loading washers, you might see mold developing in the pleats of the door or the detergent drawer. For top-loading washers, you’ll more probably find mold in the drum or inside walls. Here are a few suggestions to prevent mold in your laundry room:

• Do laundry frequently. Do not let wet or dirty clothes remain for a long time on the floor or in a basket.
• Dry clothes immediately.
• Put the lid/door of a washer open after washes to let them dry out.
• Refer to the owner’s guidebook on how to clean out the washing machine regularly. At least once a month, check the door pleats, drum, and detergent drawers clean and free of dirt.

Dishwasher

The dishwasher can be another comfortable spot for mold. Much like the washing machine, the dishwasher has creases, sections, and edges that moisture and food can sneak. For example, the silverware baskets and inner panels can catch small bits of food and mostly go unseen. Without cleaning the dishwasher regularly, it can surely end up on a list of your moldy appliances. Here are a few other suggestions on keeping your dishwasher mold-free:

• Make sure you wash all the dishes before placing them inside the dishwasher. If small bits of food sit for a long period, mold can develop.
• After operating the dishwasher, let the door open for a short period so it can dry thoroughly before closing.
• At least once a week, run the heat-dry setting to eliminate any bacteria inside of the dishwasher. After driving this function, be sure also to leave the door open to enable the inside to dry.
• Remove the silverware baskets after every wash and clean them to assure that no food is sneaking in its folds.

Refrigerator

Mold inside of your refrigerator is apparently the most cringe-worthy of all of the moldy appliances. Of course, this is where our food lives! Unluckily, as stated above, food is also a platitude that mold can develop. Between exposed, old food, and moisture, the refrigerator is a very happy place for mold to thrive. Keeping the refrigerator clean is a common way to stop mold, but you require to do more than just clean up shelves and trays. Here are some of the best ways to keep your refrigerator off the moldy appliances list:

• Any spills or small bits of food need to be wiped off quickly. Don’t let juices or soda spills to turn crusty or hardened.
• Once a month, remove all trays, drawers, egg boxes, butter sections, and clean everything down. Using hydrogen peroxide or vinegar are chemical-free methods to keep the refrigerator clean and mold-free.
• Use a toothbrush or small scrub brush to clean out the door folds.
• Ensure the trays, partitions, and shelves are dry before you close the doors.

For Help with Moldy Appliances

Let’s face it. Sometimes mold development can go a bit too far to the point where you might have to call the mold remediation Long Island experts for the assistant. For example, moldy water lines or leaks can be a larger problem than you can think. If you believe you may have a mold problem that has gone too far past repair, contact mold cleaning, and restoration specialists to fix the issue. Overlooking mold growth can lead to health problems and poor functioning appliances. To ensure you, your family and your appliances are mold-free, call the experts today for a thorough inspection of your home.

How is Mold the Cause Behind Structural Damage to Homes?

If you’ve lately become a new homeowner, it’s a great idea to familiarize yourself with the consequences of mold. Every home buyer expects that mold will never be a problem for them. But the fact is, more than half the homes in the United States will deal with mold difficulties at one time or another. Of course, mold causes structural damage to a house and your well-being. Disclosure to moldy surroundings can cause asthma, congestion, coughing, and irritation of the throat, eyes, and skin. With all of the possible harm that mold can do, it’s essential to know how to stop it from invading your home. In this blog, you will know what mold is, how it generates, what you should do to combat the structural damage caused by it and how mold removal Brooklyn NY is a good approach to stop the mold development.

What is Mold?

There are hundreds of diverse varieties of mold NYC that develops both indoors and outdoors. Not all mold is harmful. Most of us come in contact with some form of mold every day. But the mold that develops in wet or poorly lit regions is never a good indication. Mold is a kind of fungus that locks on to materials such as wood, fabrics, cardboard, or paper and grows in areas that have an abundance of moisture and not enough sunlight. Mold will feed off of these organic substances and eat away at them if left unattended. If mold thrives on other materials such as glass, metal, or concrete, it will have a limited impact on these surfaces.

How Does Mold Cause Structural Damage?

Now that you know what mold really is and how it develops, you can apparently assume how mold causes structural damage to homes. Mold can totally ruin things like furniture, carpets, shelving, and other portable materials. When located in areas that can be relocated, it’s essential to replace such things as soon as possible. Since mold can develop and spread, always check to ensure you’ve fully removed the source of the problem. Mold causes structural damage to homes when it’s not correctly addressed after finding it for the first time. It can also be seen in heating and air conditioning systems.

When mold develops in ventilation systems like these, it can be incredibly dangerous to your well-being. Mold located in these regions can impact your air quality and build many respiratory problems. It’s crucial to remember to clean out air ducts and filters frequently. Mold can also flow into walls, ceilings, floorboards, or tiles and can effectively damage the grounds of a home.

Repairing Mold Damage

Mold causes structural damage, critical health problems, and produces poor air quality. Because of the sheer damage and threat of mold, repairs need to be done sooner rather than later. Removing mold can be simple or very challenging to do; it all depends on the construction and how far the mold has developed. One of the reasons that make it challenging to repair mold yourself without expert help is the fact that mold can grow during the removal procedure. You may believe that you’re getting to the cause of the problem when the mold is actually being unwittingly developed into other parts of your home. For example, let’s say you’ve noticed mold growing on a wooden cupboard in an inadequately lit room.

As you remove the shelving unit, the mold can fall and scatter into carpets or other surfaces. As soon as the mold settles on the carpet, it will connect and develop again. If mold is detected early enough, you may be able to clean and repair it without any more issues. If the mold has expanded, it can be close to impossible to repair without expert guidance. As stated above, certain surfaces are more comfortable to repair and clean. Mold may develop on metals, glass, or concrete, but it can’t damage these surfaces as it does with wood.

What More to Learn About How Mold Causes Structural Damage to Homes?

Cleaning and repairing the destruction from the mold is a critical task and shouldn’t be taken carelessly. Time is always of the essence if it is about mold. The more you wait to settle a mold issue, the more destruction it can do to your family’s well-being and the construction of your home. Also, the repairs can become costlier if the mold problem continues and becomes more critical. It’s essential to communicate with a mold remediation company as soon as possible. A mold remediation specialist can discover a way to remove the mold without it spreading to other parts of your home. Also, a mold remediation specialist can manage several mold tests in your home to make sure that your air quality is not being affected. Contact today!

Tips for Choosing a Professional Mold Removal Service

Molds are generally known as fungi, like parasites that are found at any of those structures or found in those houses. The molds thrive on both dead and living organisms. Molds are known to have harmful effects on human beings and shall be kept out of your homes, commercial properties, and offices. If mold grows inside your property, it will lead to health problems, including allergic reactions from skin rashes, sneezing to asthma attacks, and respiratory ailments. You need to hire professionals who offer the best mold removal service in the town. As per some experts of mold removal, if the mold grows for a longer duration, it causes more damage.

Here are some tips on how you can hire the best mold removal service in Brooklyn:

The mold removal contractor should be recognized for their expertise and also should be experienced.

The mold contractor who offers mold removal service should have the adequate necessary experience to do the respective job from mold inspection to mold removal. If proper procedure used, meeting the guidelines and all their staff adequately trained. The professionals should offer safe and effective service that will ensure they accomplish the job effectively.

Get recommendations and references from others who might have used the services provided by the inspector.

When you get references about the contractor you have in mind from satisfied clients, then it would be safe for you to hire them as there are higher chances you will also experience the same kind of mold removal service. Many companies or contractors also have websites so that the clients can check-out some success stories as well as testimonials from previous clients.

Choose a contractor that offers a piece of expert advice on potential mold growth prevention.

There are some things that you cannot control that lead to the extensive growth of mold. The main aim of hiring professionals who offer mold removal service is to clean the image and provide advice that can help you prevent potential growth. The expert advice will let you contain it, so it doesn’t cause significant damage to the first site.

Choose a professional mold removal service.

There are several options available in the market, so when choosing a professional mold removal expert, it is confusing to select the best one. You can be presented with several service providers that offer mold testing Brooklyn with a pure Google research that makes it more difficult to separate from the best.

Choose a company that provides free estimates.

It is always a great idea to get free quotations from several professionals who offer mold testing Brooklyn. By getting different forecasts, you can easily compare the several prices and packages.  It will also help you to get the best mold removal company for the best value of money.

Thus, mold removal is done through a variety of tools and types of equipment to kill the parasites spread. Molds usually reappear if these products or tools not appropriately used.

Why Choose New York Mold Specialist?

Amongst the various mold specialist in the region, New York Mold Specialist is one of the best choices for mold testing and removal. The company has experts trained, skilled, and have relevant experience in a similar field. Moreover, our experts do not end their job early and stay with you and provide you extensive services till the last. These experts make sure to be available for you, day and night, and help you get rid of the problem of mold for good.

Hence, it is always better to get your hands on a professional service to say a final goodbye to molds for a lifetime and live safely.

Tips for Effective Mold Removal by Certified Experts

Are You are Seeking for the Reliable Company for Mold Removal in New York?

The New York Mold Specialist’s would be the best which specializes in removing and preventing mold growth. The company has licensed technicians who are professional experts at identifying mold and mildew, and using the modern technology and equipments to do away with microbes that enter homes due to moist environment. When it move towards remediating mold it’s always best to hire a professional mold removal and remediation service.

Mold is Present Almost Everywhere, Indoors and Outdoors:

• Removing large infestations requires precautions
• Open up moldy walls
• Remove moldy carpet
• Cleanup and repair
• Seal off the damaged area

Thus, Mold Remediation is provided by New York Mold Specialist’s for your safety and health by utilizing containment control and by providing contaminant removal. It offers a wide array of services like mold testing, mold removal, water/flood damage repair, fire damage, air duct cleaning, and anti-bacterial cleaning that no other companies can do! This is the reason they are known for their best reliable services to cater all your requirements in the most effective way possible.

Protective Equipment Used for Mold Remediation

The mold remediation process is one of the times when mold spores are most probably to be disturbed into the air. This is why you should wear protective clothing and equipment while executing mold remediation.

Protective Tools Includes:

• Dust filter mask or respirator
• Goggles
• Gloves
• Protective clothing that covers your entire body and can be easily cleaned or disposed of.

The Major Steps Involved in Mold Remediation and Reduction are:

1. Wear protective equipment
2. Contain mold spores
3. Set up negative pressure
4. Remove the mold
5. Prevent mold returning
6. Clean belongings
7. HEPA vacuum
8. Dispose of the mold

Hence, this is useful for the efficient and effective Mold Removal in New York. Remediation area will be kept under negative pressure with air exhausted to the outdoors if physically possible to stop any cross contamination.
After the completion of remediation work all neighboring areas will be air scrubbed and heap vacuumed to remove any ambient mold spores. Thus, a post remediation visual inspection air sampling will be performed upon clients request and approval. While proper safety would be placed to maintain the health and concerns of the occupants.

Therefore, the customer relations is an extremely high regard and is kept open for 24/7 to take any questions or concerns you might have no matter the situation or circumstance. Thus, remediation projects are designed ahead of time with a guaranteed work dead line and completes every single aspect that goes into a positive mold remediation in a resourceful and quick matter.

Safe and Fast Mold Removal

During the mold removal in NYC, it is the time when mold spores are most likely to be stirred up into the air. To reduce this you should begin the moistening any dry mold growth as dry mold will allow many more spores to escape into the air when disturbed. Also, use a spray bottle of water to wet the dry mold slightly. After this use a key to remove the mold from the surface. Different solutions will work better for different surfaces.

Several Solutions to Kill Mold are the Following:

• Bleach
• Borax
• Vinegar
• Ammonia

However, even if you follow a daily cleaning routine, mold could still grow in some of the lesser-cleaned areas of the home. Therefore, when it comes to something as dangerous as mold, hiring the right company is must. Here is the right place you are having trusted and high-quality professionals which provides best services to the customers.